Threading your serger is the number one complaint I hear about owning an overlock machine. So, let’s face that fear first.Threading your serger is very similar to threading a traditional sewing machine, there are just a few more steps.  I’ve added a LOT of photos, to hopefully clarify any confusion there could be.  To start, let’s learn how to take thread OUT of the serger. Most sergers come pre-threaded.  You’re going to start by cutting the thread….. After cutting all four spools, it should look similar to this…  Next, lift your foot pedal up (the lever is usually on the side of the machine) You are going to take the thread out…